Hyundai Elantra AD: Trunk Trim - Body (Interior and Exterior) - Hyundai Elantra AD 2017-2020 Service ManualHyundai Elantra AD: Trunk Trim

Repair procedures

Replacement
  
• Put on gloves to prevent hand injuries.
  
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
• Take care not to bend or scratch the trim and panels.
1. Remove the rear seat cushion assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

2. Remove the rear seat back assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

3. Remove the rear door scuff trim.

(Refer to Interior Trim - "Door Scuff Trim")
4. After loosening the mounting screws, then remove the partition center trim (A).
5. Remove the luggage covering mat (B).
6. Remove the rear transverse trim (C).
7. Remove the rear wheel house trim (D).
8. After loosening the mounting screws, remove the luggage side trim (E).
9. To intall, reverse the removal procedure.
  
• Replace any damaged clips.
[Folding type]

1. Rear transverse trim
2. Luggage covering mat
3. Fire extinguisher
4. Luggage net
5. Luggage side trim [LH]
 6. Luggage side trim [RH]
7. Rear package tray trim
8. Rear wheel house trim [LH]
9. Rear wheel house trim [RH]
10. Partition center trim

[Bench type]

1. Rear transverse trim
2. Luggage covering mat
3. Fire extinguisher
4. Luggage net
5. Luggage side trim [LH]
 6. Luggage side trim [RH]
7. Rear package tray trim
8. Rear wheel house trim [LH]
9. Rear wheel house trim [RH]
10. Partition center trim

Interior Trim
Components and Components Location Components 1. Cowl side trim 2. Front door scuff trim 3. Rear door scuff trim 4. Front pillar trim 5. Front door step tr ...

Windshield Glass
Components and Components Location Components 1. Windshield glass Repair procedures Replacement [Removal] ...