Hyundai Elantra CN7: Repair procedures
| Component Replacement after Deployment |
|
When the front airbag(s) deployed after a collision, replace the following items.
| – | SRSCM |
| – | Deployed airbag |
| – | Lighted seat belt pretensioner |
| – | Lighted anchor pretensioner |
| – | Front impact sensors |
| – | Airbag wiring harnesses |
| – | Inspect the clock spring for heat damage. If any damage found, replace the clock spring. |
When the side/curtain airbag deployed after a collision, replace the following items.
| – | SRSCM |
| – | Deployed airbag |
| – | Side impact sensor for the deployed side |
| – | Airbag wiring harnesses |
| – | Lighted seat belt pretensioner |
| – | Lighted anchor pretensioner |
After the vehicle is completely repaired, confirm the SRS airbag system is OK.
| – | Turn the ignition switch ON; the SRS indicator should come on for about six seconds and then go off. |
