Hyundai Elantra HD: Power Door Lock Relay. Repair procedures
Inspection
Door Lock
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the ICM relay box.
|
| 3. |
Check for continuity between the terminals.
|
| 4. |
There should be continuity between the No.5 terminal
and No.14 terminals in the ICM-B when power and ground are connected
to the No.11 terminal and No.13 terminal in the ICM-B.
|
| 5. |
There should be no continuity between the No.5 terminal
and No.14 terminal in the I/P-D when power is disconnected.
|
Door Unlock
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the ICM relay box.
|
| 3. |
Check for continuity between the terminals.
|
| 4. |
There should be continuity between the No.4 terminal
and No.14 terminal in the ICM-B when power and ground are connected
to the No.10 terminal and No.13 terminal in the ICM-B.
|
| 5. |
There should be no continuity between the No.4 terminal
and No.14 terminal in the ICM-B when power is disconnected.
|
Trunk Lid Open
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the passenger compartment junction box.
|
| 3. |
Check for continuity between the terminals.
|
| 4. |
There should be continuity between the No.3 terminal
in the I/P-H and the No.2 terminal in the I/P-D when power and ground
are connected to the No.3 terminal in the I/P-H and the No.28 terminal
in the I/P-F.
|
| 5. |
There should be no continuity between the No.3 terminal
in the I/P-H and the No.2 terminal in the I/P-D when power and ground
are connected to the No.3 terminal in the I/P-H and the No.28 terminal
in the I/P-F.
|
