Hyundai Elantra MD/UD: Installation - Repair procedures - Ignition Switch Assembly - Body Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Installation

1.
Install the key lock cylinder.
2.
Install the key warning switch and key Illumination.
3.
Install the key warning/immobilizer connector.
4.
Connect the ignition switch connector after Install the ignition switch.
5.
Install the wiper switch.
6.
Install the steering column shrouds.
7.
Install the driver crash pad lower panel.

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to the BD group - "Crash pad&qu ...

Inspection
1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column. 2. Check for continu ...