Hyundai Elantra HD: Transmitter. Repair procedures
Inspection
| 1. |
Check that the red light flickers when the door lock
or unlock button is pressed on the transmitter.
|
| 2. |
Remove the battery and check voltage if the red light
doesn't flicker.
|
| 3. |
Replace the transmitter battery with a new one, if
voltage is below 3V then try to lock and unlock the doors with the transmitter
by pressing the lock or unlock button five or six times.
|
| 4. |
If the doors lock and unlock, the transmitter is
O.K, but if the doors don't lock and unlock, register the transmitter
code, then try to lock and unlock the doors.
|
| 5. |
If the transmitter is fails, replace only the transmitter
(A).
|
Transmitter Code Registration
| 1. |
Connect the DLC cable of scan tool to the data link
connector (16 pins) in driver side crash pad lower panel, turn the power
on scan tool.
|
| 2. |
Select the vehicle model and then do "CODE SAVING".
|
| 3. |
After selecting "CODE SAVING" menu, push "ENTER"
key, then the screen will be shown as below.
|
| 4. |
After removing the ignition key from key cylinder,
push "ENTER" key to proceed to the next mode for code saving. Follow
steps 1 to 4 and then code saving is completed.
* In registration mode, it shall be possible to register
up to Max 4EA.
|
