Hyundai Elantra MD/UD: Specifications - General Information - Engine Mechanical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Specifications

Specifications

Description
 Specifications
 Limit
General
Type
 In-line, DOHC
 　
Number of cylinders
 4
 　
Bore
 81.0 mm (3.1890 in.)
 　
Stroke
 87.2 mm (3.4331 in.)
 　
Total displacement
 1797 cc (109.67 cu.in.)
 　
Compression ratio
 10.3±0.2 : 1
 　
Firing order
 1-3-4-2
 　
Valve timing
Intake valve
 Open
 BTDC 3° ~ BTDC 53°
 　
Close
 ABDC 54° ~ ABDC 4°
 　
Exhaust valve
 Open
 BBDC 52° ~ BBDC 12°
 　
Close
 ATDC 3° ~ ATDC 43°
 　
Camshaft
Cam height
 Intake
 39.0 mm (1.5354 in.)
 　
Exhaust
 38.7 mm (1.5236 in.)
 　
Journal outer diameter
 Intake
 No.1: 35.959 ~ 35.975 mm
(1.41571 ~ 1.41634 in.)
 　
No.2,3,4,5: 22.959 ~ 22.975 mm
(0.90390 ~ 0.90453 in.)
 　
Exhaust
 No.1: 35.959 ~ 35.975 mm
(1.41571 ~ 1.41634 in.)
 　
No.2,3,4,5: 22.959 ~ 22.975 mm
(0.90390 ~ 0.90453 in.)
 　
Bearing oil clearance
 Intake
 No.1: 0.032 ~ 0.062 mm
(0.00126 ~ 0.00244 in.)
No.2,3,4,5: 0.032 ~ 0.062 mm
(0.00126 ~ 0.00244 in.)

Exhaust
 No.1: 0.032 ~ 0.062 mm
(0.00126 ~ 0.00244 in.)

No.2,3,4,5: 0.032 ~ 0.062 mm
(0.00126 ~ 0.00244 in.)

End play
 0.10 ~ 0.19 mm (0.0039 ~ 0.0075 in.)
Valve
Valve length
 Intake
 102.22 mm (4.0244 in.)
 101.97 mm (4.0146 in.)
Exhaust
 104.04 mm (4.0961 in.)
 103.79 mm (4.0862 in.)
Stem outer diameter
 Intake
 5.465 ~ 5.480 mm (0.21516 ~ 0.21575 in.)
 　
Exhaust
 5.458 ~ 5.470 mm (0.21488 ~ 0.21535 in.)
 　
Face angle
 45.25° ~ 45.75°
 　
Thickness of valve head
(margin)
 Intake
 1.30 mm (0.0512 in.)
Exhaust
 1.26 mm (0.0496 in.)
Valve stem to valve guide clearance
 Intake
 0.020 ~ 0.047 mm (0.00079 ~ 0.00185 in.)
Exhaust
 0.030 ~ 0.054 mm (0.00118 ~ 0.00213 in.)
Valve guide
Length
 Intake
 43.8 ~ 44.2 mm (1.7244 ~ 1.7402 in.)
 　
Exhaust
 43.8 ~ 44.2 mm (1.7244 ~ 1.7402 in.)
 　
Inner diameter
 Intake
 5.500 ~ 5.512 mm (0.21654 ~ 0.21701 in.)
 　
Exhaust
 5.500 ~ 5.512 mm (0.21654 ~ 0.21701 in.)
 　
Valve seat
Width of seat contact
 Intake
 1.05 ~ 1.35 mm (0.0413 ~ 0.0532 in.)
 　
Exhaust
 1.35 ~ 1.65 mm (0.0532 ~ 0.0650 in.)
 　
Seat angle
 Intake
 44° 45' ~ 45° 6'
 　
Exhaust
 44° 45' ~ 45° 6'
 　
Valve spring
Free length
 45.93 mm (1.8083 in.)
 　
Load
 19.6 ± 1.0 kg / 37.0 mm
(43.21 ± 2.20 lb / 1.4567 in.)
 　
45.7 ± 1.8 kg / 27.0 mm
(100.75 ± 3.97 lb / 1.0630 in.)
 　
Out of squareness
 Less than 1.5°
 　
Cylinder head
Flatness of gasket surface
 Less than 0.05 mm (0.0020 in.) for total area
 　
Less than 0.02 mm (0.0008 in.) for a section of 100 mm (3.9370 in.) × 100 mm (3.9370 in.)
 　
Flatness of manifold mounting surface
 Intake
 Less than 0.10 mm (0.0039 in.)
 　
Exhaust
 Less than 0.10 mm (0.0039 in.)
 　
Piston
Piston outer diameter
 80.97 ~ 81.00 mm (3.1878 ~ 3.1890 in.)
 　
Piston to cylinder clearance
 0.02 ~ 0.04 mm (0.0008 ~ 0.0016 in.)
 　
Ring groove width
 No. 1 ring
 1.030 ~ 1.050 mm (0.04055 ~ 0.04134 in.)
No. 2 ring
 1.230 ~ 1.250 mm (0.04843 ~ 0.04921 in.)
Oil ring
 2.010 ~ 2.025 mm (0.07913 ~ 0.07972 in.)
Piston ring
Side clearance
 No. 1 ring
 0.040 ~ 0.080 mm (0.00157 ~ 0.00315 in.)
No. 2 ring
 0.040 ~ 0.080 mm (0.00157 ~ 0.00315 in.)
Oil ring
 0.060 ~ 0.145 mm (0.00236 ~ 0.00571 in.)
End gap
 No. 1 ring
 0.15 ~ 0.30 mm (0.0059 ~ 0.0118 in.)
No. 2 ring
 0.30 ~ 0.45 mm (0.0118 ~ 0.0177 in.)
Oil ring
 0.20 ~ 0.70 mm (0.0079 ~ 0.0276 in.)
Piston pin
Piston pin outer diameter
 19.996 ~ 20.000 mm (0.78724 ~ 0.78740 in.)
 　
Piston pin hole inner diameter
 20.004 ~ 20.009 mm (0.78756 ~ 0.78775 in.)
 　
Piston pin hole clearance
 0.004 ~ 0.013 mm (0.00016 ~ 0.00051 in.)
 　
Connecting rod small end hole inner diameter
 20.010 ~ 20.021 mm (0.78779 ~ 0.78823 in.)
 　
Piston pin-to-connecting rod bushing oil clearance
 0.010 ~ 0.025 mm (0.00039 ~ 0.00098 in.)
 　
Connecting rod
Connecting rod big end inner diameter
 48.000 ~ 48.018 mm (1.88976 ~ 1.89047 in.)
 　
Connecting rod bearing oil clearance
 0.028 ~ 0.046 mm (0.00110 ~ 0.00181 in.)
Side clearance
 0.10 ~ 0.25 mm (0.0039 ~ 0.0098 in.)
Crankshaft
Main journal outer diameter
 54.942 ~ 54.960 mm (2.16307 ~ 2.16378 in.)
 　
Pin journal outer diameter
 44.954 ~ 44.972 mm (1.76984 ~ 1.77055 in.)
 　
Main bearing oil clearance
 0.016 ~ 0.034 mm (0.00063 ~ 0.00134 in.)
End play
 0.07 ~ 0.25 mm (0.0028 ~ 0.0098 in.)
Cylinder block
Cylinder bore
 81.00 ~ 81.03 mm (3.1890 ~ 3.1902 in.)
 　
Flatness of gasket surface
 Less than 0.05 mm (0.0020 in.) for total area
 　
Less than 0.02 mm (0.0008 in.) for a section of 100 mm (3.9370 in.) × 100 mm (3.9370 in.)
 　
Engine oil
Oil quantity
 Total
 4.5 L (1.19 U.S.gal., 4.76 U.S.qt., 3.96 lmp.qt.)
 When replacing a short engine or block assembly
Oil pan
 3.7 L (0.98 U.S.gal., 3.91 U.S.qt., 3.26 lmp.qt.)
 　
Drain and refill
 4.0 L (1.06 U.S.gal., 4.23 U.S.qt., 3.52 lmp.qt.)
 Including oil filter
Oil grade
 Recommendation
 5W-20/GF4&SM
 If not available, refer to the recommended API or ILSAC classification and SAE viscosity number.
Classification
 API SL, SM or above
ILSAC GF4 or above
 Satisfy the requirement of the API or ILSAC classification.
SAE viscosity grade
 Recommended SAE viscosity number
 Refer to the "Lubrication System".
Oil pressure (at 1,000rpm)
 98.07 kPa (1.0 kgf/cm², 14.22 psi) or above
 Oil temperature (oil pan): 110±2°C (230±35.6°F)
Oil Pump
Relief valve opening pressure
 415 ~ 485 kPa
(4.23 ~ 4.95 kgf/cm², 60.16 ~ 70.41 psi)
 　
Side clearance
 0.040 ~ 0.090 mm (0.00157 ~ 0.00354 in.)
 　
Body clearance
 0.200 ~ 0.292 mm (0.00787 ~ 0.01150 in.)
 　
Guide clearance
 0.030 ~ 0.075 mm (0.00118 ~ 0.00295 in.)
 　
Cooling system
Cooling method
 Forced circulation with cooling fan
 　
Coolant quantity
 5.9 ~ 6.3 L (1.56 ~ 1.66 U.S.gal., 6.23 ~ 6.66 U.S.qt., 5.19 ~ 5.54 lmp.qt. )
 　
Thermostat
 Type
 Wax pellet type
 　
Opening
temperature
 88±1.5°C (190.4±34.7°F)
 　
Full opening valve lift / temperature
 More than 8 mm (0.3 in.) / 100°C (212°F)
 　
Radiator cap
 Main valve opening pressure
 93.16 ~ 122.58 kPa
(0.95 ~ 1.25 kgf/cm², 13.51 ~ 17.78 psi)
 　
Vacuum valve opening pressure
 0 ~ 6.86 kPa (0 ~ 0.07 kgf/cm², 0 ~ 1.00 psi)
 　

Tightening Torques
Item
 Quantity
 N.m
 kgf.m
 lb-ft
Engine mounting
Engine mounting bracket to body fixing bolt
 3
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Engine mounting support bracket to engine mounting insulator fixing nut
 1
 63.7 ~ 83.4
 6.5 ~ 8.5
 47.0 ~ 61.5
Engine mounting support bracket to engine support bracket fixing bolt
 1
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Engine mounting support bracket to engine support bracket fixing nut
 2
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Transaxle mounting bracket to body fixing bolt
 3
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Transaxle mounting support bracket  to transaxle mounting insulator fixing bolt
 2
 88.3 ~ 107.9
 9.0 ~ 11.0
 65.1 ~ 79.6
Roll rod bracket to sub frame fixing bolt
2
 49.0 ~ 63.7
 5.0 ~ 6.5
 36.2 ~ 47.0
Roll rod bracket to roll rod support bracket fixing bolt & nut
 1
 107.9 ~ 127.5
 11.0 ~ 13.0
 79.6 ~ 94.0
Timing system
Crankshaft pulley bolt
 1
 196.1 ~ 205.9
 20.0 ~ 21.0
 144.7 ~ 151.9
Timing chain cover service plug bolt
 1
 29.4 ~ 39.2
 3.0 ~ 4.0
 21.7 ~ 28.9
Timing chain cover bolt (M10×55)
 3
 39.2 ~ 49.0
 4.0 ~ 5.0
 28.9 ~ 36.2
Timing chain cover bolt (M10×85)
 2
 39.2 ~ 49.0
 4.0 ~ 5.0
 28.9 ~ 36.2
Timing chain cover bolt - Seal bolt (M6×38)
 1
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Timing chain cover bolt - Seal bolt (M8×50)
 1
 19.6 ~ 23.5
 2.0 ~ 2.4
 14.5 ~ 17.4
Timing chain cover bolt (M8×50)
 11
 18.6 ~ 23.5
 1.9 ~ 2.4
 13.7 ~ 17.4
Timing chain cover bolt (M8×28)
 5
 18.6 ~ 23.5
 1.9 ~ 2.4
 13.7 ~ 17.4
Timing chain tensioner bolt
 2
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Timing chain tensioner arm bolt
 1
 18.6 ~ 22.6
 1.9 ~ 2.3
 13.7 ~ 16.6
Timing chain guide bolt
 2
 18.6 ~ 22.6
 1.9 ~ 2.3
 13.7 ~ 16.6
Cylinder head
 　
 　
 　
 　
Engine cover mounting bolt
 2
 7.8 ~ 9.8
 0.8 ~ 1.0
 5.8 ~ 7.2
Ignition coil bolt
 4
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Cylinder head cover bolt
 14
 [3.9~5.9] + [7.8~9.8]
 [0.4~0.6] + [0.8~1.0]
 [2.9~4.3] + [5.8~7.2]
Injector & rail assembly bolt
 2
 18.6 ~ 23.5
 1.9 ~ 2.4
 13.7 ~ 17.4
CVVT bolt (LH/RH)
 2
 64.7 ~ 76.5
 6.6 ~ 7.8
 47.7 ~ 56.4
Camshaft bearing cap bolt (M6)
 10
 11.8 ~ 13.7
 1.2 ~ 1.4
 8.7 ~ 10.1
Camshaft bearing cap bolt (M8)
 15
 18.6 ~ 22.6
 1.9 ~ 2.3
 13.7 ~ 16.6
Cam carrier bolt
 2
 18.6 ~ 22.6
 1.9 ~ 2.3
 13.7 ~ 16.6
Cylinder head bolt
 10
 [32.4~36.3] + [90~95°] + [90~95°]
 [3.3~3.7] + [90~95°] + [90~95°]
 [23.9~26.8] + [90~95°] + [90~95°]
Engine hanger bolt (Front/Rear)
 2
 34.3 ~ 39.2
 3.5 ~ 4.0
 25.3 ~ 28.9
Camshaft position sensor (LH/RH)
 2
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Oil control valve (OCV) bolt (LH/RH)
 2
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Cylinder block
Flywheel bolt (M/T)
 7
 117.7 ~ 127.5
 12.0 ~ 13.0
 86.8 ~ 93.9
Drive plate bolt (A/T)
 7
 117.7 ~ 127.5
 12.0 ~ 13.0
 86.8 ~ 93.9
Connecting rod bearing cap bolt
 8
 [17.7~21.6] + [88~92°]
 [1.8~2.2] + [88~92°]
 [13.0~15.9] + [88~92°]
Lower crankcase bolt
 11
 18.6 ~ 23.5
 1.9 ~ 2.4
 13.7 ~ 17.4
Main bearing cap bolt
 10
 [27.5~31.4] + [120~125°]
 [2.8~3.2] + [120~125°]
 [20.3~23.1] + [120~125°]
Crankshaft position sensor bolt
 1
 9.8 ~ 11.8
 1.0 ~ 1.2
 7.2 ~ 8.7
Knock sensor
 1
 18.6 ~ 23.5
 1.9 ~ 2.4
 13.7 ~ 17.4
Repair procedures
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compressi ...