Hyundai Elantra HD: Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the Hi-Scan Pro
to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing
of the related DTCs.
|
When the front airbag(s) deployed after a collision, replace
the following items.
| - |
SRSCM
|
| - |
Deployed airbag(s)
|
| - |
Deployed seat belt pretensioner(s)
|
| - |
Front impact sensors
|
| - |
SRS wiring harnesses
|
| - |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
When the seat belt pretensioner(s) deployed after a collision,
replace the following items.
| - |
Deployed seat belt pretensioner(s)
|
| - |
SRSCM
|
| - |
Front impact sensors
|
| - |
SRS wiring harnesses
|
When the side/curtain airbag(s) deployed after a collision,
replace the following items.
| - |
SRSCM
|
| - |
Deployed airbag(s)
|
| - |
Side impact sensor(s) for the deployed side(s)
|
| - |
SRS wiring harnesses
|
After the vehicle is completely repaired, confirm the SRS
airbag system is OK.
| - |
Turn the ignition switch ON, the SRS indicator should
come on for about 6 seconds and then go off.
|
