|
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to "Valve Body" in this group)
|
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Description
35R Clutch (35R/C) Control Solenoid Valve is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
Hyundai Elantra MD/UD: Removal
