Hyundai Elantra MD/UD: Removal - Brake Switch. Repair procedures - ISG (Idle Stop & Go) System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Turn ignition switch OFF.
2.
Remove the crash pad lower panel. (Refer to the Body group-"crash pad")
3.
Disconnect the stop lamp switch connector (A).

Inspection
1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in an ...

Installation
1. Install in reverse of removal. ...