Hyundai Elantra MD/UD: Removal - ETC (Electronic Throttle Control) System. Repair procedures - Engine Control System - Fuel System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the resonator and the air intake hose (Refer to “Intake And Exhaust System” in EM group).
3.
Disconnect the ETC module connector (A).

4.
Disconnect the coolant hoses (B).
5.
Remove the installation bolts (C), and then remove the ETC module from the engine.


Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of ...

Installation
• Install the component with the specified torques. • ...