Hyundai Elantra HD: Rear Upper Arm. Repair procedures - Rear Suspension System - Suspension System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Rear Upper Arm. Repair procedures

Removal

1.
Remove the rear wheel & tire.
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the rear upper arm (C) by loosening the mounting bolts & nut (A, B).


Inspection

1.
Check the bushing for wear and deterioration.
2.
Check the rear upper arm or damage and deformation.
3.
Check for all bolts and nut.

Installation

1.
Install the rear upper arm (C) between the rear cross member and the carrier assembly and then tighten the mounting bolts and nut (A, B).

Tightening torque
Bolt (A): 100 ~ 120N.m (10.0 ~ 12.0kgf.m, 72 ~ 87lb-ft)
Bolt & Nut (B): 100 ~ 120N.m (10.0 ~ 12.0kgf.m, 72 ~ 87lb-ft)

Install the rear upper arm so that the letter "R" can face the rear of vehicle.

2.
Install the rear wheel & tire.

Tightening torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)

Be careful not to damage to the hub bolts when installing the rear wheel& tire.