Hyundai Elantra HD: Rear Stabilizer Bar. Repair procedures - Rear Suspension System - Suspension System - Hyundai Elantra HD 2006–2010 Service ManualHyundai Elantra HD: Rear Stabilizer Bar. Repair procedures

Removal

1.
Remove the rear wheel & tire.
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the stabilizer link (C) by loosening the nuts (A, B).
3.
Remove the rear stabilizer bar (B) from the cross member by loosening the bracket mounting bolts (A).
4.
Remove the mounting bracket (A) and bushing (B) from the rear stabilizer bar.

Inspection

1.
Check the rear stabilizer bar for deformation.
2.
Check the rear stabilizer link ball joint for damage.

Installation

1.
Install the mounting bracket (A) and bushing (B) to the rear stabilizer bar.
2.
Install the rear stabilizer bar (B) to the cross member by tightening the bracket mounting bolts (A).
Tightening torque :
45 ~ 55N.m (4.5 ~ 5.5kgf.m, 33 ~ 40lb-ft)

3.
Connect the rear stabilizer link (C) between the rear stabilizer bar and the trailing arm and then tighten the nut (A, B).
Tightening torque :
45 ~ 55N.m (4.5 ~ 5.5kgf.m, 33 ~ 40lb-ft)

4.
Install the rear wheel & tire.
Tightening torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Be careful not to damage to the hub bolts when installing the rear wheel& tire.

Rear Stabilizer Bar. Components and Components Location
Component Location 1. Rear stabilizer link 2. Mounting bracket 3. Bushing 4. Rear stabilizer bar ...