Hyundai Elantra MD/UD: Power Window Switch. Repair procedures - Power Windows - Body Electrical System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Power Window Switch. Repair procedures

Inspection

Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the switch.
4.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

[Auto Down]

[Safety Up/Down]

Passenger Power Window Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the switch.
4.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
Rear Power Window Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear door trim panel.
(Refer to the BD group - "Rear door")
3.
Disconnect the 8P connector from the switch.
4.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Power Window Relay. Repair procedures
Inspection Diagnosis With GDS 1. It will be able to diagnose defects of power window with GDS quickly. GDS can operates actuator forcefully, input/output value monito ...