| •
|
Check that the battery cables are connected to the correct
terminals.
|
| •
|
Disconnect the battery cables when the battery is given
a quick charge.
|
| •
|
Never disconnect the battery while the engine is running.
|
|
| Check The Battery Terminals And Fuses |
|
1. |
Check that the battery terminals are not loose or corroded.
|
|
2. |
Check the fuses for continuity.
|
|
1. |
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
|
Cracks on the rib side of a belt are considered acceptable.
If the belt has chunks missing from the ribs, it should be replaced.
|
|
1.
Disconnect the battery negative (-) cable.
2.
Remove the drive belt.
(Refer to Engine Mechanical System - "Timing Chain")
...
Hyundai Elantra MD/UD: On-vehicle Inpection
