Hyundai Elantra MD/UD: Measuring Actual Dimensions - General Information - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Measuring Actual Dimensions

1.
These dimensions indicate the actual linear distance between measurement points, and are used as the reference dimensions when a tracking gauge is used for measurement.
2.
First adjust both probes to the same length (A=A') before measurement.
Check the probes and gauge itself to make sure there is no free play.

Dimensions Projected
1. These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body ...

Measurement Point
Measurements should be taken at the center of the hole. ...