Hyundai Elantra MD/UD: Interior Trim. Repair procedures - Interior - Body (Interior and Exterior) - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Interior Trim. Repair procedures

Replacement

Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]

2.
Remove the rear seat cushion.
(Refer to the BD group - "Rear Seat")
3.
After loosening the mounting screw, then remove rear door scuff trim (A).
[Rear]

4.
Installation is the reverse of removal.
•
Replace any damaged clips.
Front Pillar Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the front pillar trim (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
Cowl Side Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front door scuff trim.
2.
Remove the hood latch release handle.
(Refer to the BD group - "Hood")
3.
Detach the clips, then remove the cowl side trim (A).
4.
Installation is the reverse of removal.
•
Replace any damaged clips.
Center Pillar Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front door scuff trim and rear door scuff trim.
2.
To remove the seat belt anchor pretensioner (C), keep on pushing the lock pins (A) as arrow direction.
And then remove the seat belt after pushing the lock pin (B).
3.
Remove the center pillar lower trim (A).
4.
After loosening the mounting bolt, then remove the center pillar upper trim (A).
5.
Installation is the reverse of removal.
•
Replace any damaged clips.
Rear Pillar Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the rear pillar trim (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
Package Tray Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat assembly.
(Refer to the BD group - "Rear Seat")
2.
Remove the rear door scuff trim.
3.
Using a screwdriver or remover, remove the rear pillar trim (A).
4.
After loosening the mounting screws and clips, then remove the luggage partition trim (A).
5.
Using a screwdriver or remover, remove the rear wheel house trim (A).
6.
Disconnect the connector (A).
7.
Using a screwdriver or remover, remove the package tray trim (A).
8.
Installation is the reverse of removal.
•
Replace any damaged clips.
•
Make sure the connector is connected properly.

Interior Trim. Components and Components Location
Components 1. Front pillar trim 2. Center pillar upper trim 3. Center pillar lower trim 4. Rear pillar trim 5. Cowl side trim 6. Front door scuff trim 7. ...

Trunk Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • ...