|
1. |
Install the wiper motor.
|
|
2. |
Install the crank arm.
|
To install the wiper motor crank arm, make sure that the
linkage is aligned with the crank arm in straight line and set
the angle of each linkages exactly.
|
|
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
To install the wiper motor crank arm, make sure that the
linkage is aligned with the crank arm in straight line and set
the angle of each linkages exactly.
Be careful not to bend the linkage.
|
|
|
4. |
Install the wiper motor and linkage assembly and then connect
the wiper motor connector.
Tightening torque:
7 ~ 11Nm (0.7 ~ 1.1, kgf.m, 5.0 ~ 7.9 lb-ft)
|
|
|
5. |
Install the cowl top cover.
|
|
6. |
Install the windshield wiper arm and blade.
Tightening torque:
22.5 ~ 26.4 Nm (2.3 ~ 2.7 kgf.m, 16.6 ~ 21.7 lb-ft)
|
|
- |
The windshield wiper motor must be cycled to make
sure that it is in the auto stop position.
If necessary, adjust the wiper arm and blade.
|
|
|
|
7. |
Install the wiper arm and blade to the auto stop position.
A : Auto stop position (Blade)
|
|
8. |
Set the cowl top cover on the specified spray position.
|
- |
When you turn on the washer, confirm 50% or more
of washer fluid lands within the spray area.
|
|
- |
If the spray area is not within the standard positions,
adjust the nozzle(s).
|
|
Specified position
|
Distance (in)
|
Distance (mm)
|
A
|
5.91
|
150
|
B
|
1.33
|
34
|
C
|
6.14
|
156
|
D
|
4.45
|
113
|
E
|
11.8
|
300
|
|
1.
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
2.
Remove the windshield wiper arm and blade.
...
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from the battery to termina ...
Hyundai Elantra MD/UD: Installation
