Hyundai Elantra MD/UD: Installation - Valve Body. Repair procedures - Hydraulic System - Automatic Transaxle System - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Installation

1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
•
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
•
Use new valve body gasket (A).


Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Electronic Oil Pump (EOP). Description and Operation
Description ISG system has a standard Mechanical Oil Pump(MOP) linked to the input shaft to generates oil pressure when input shaft rotates. ISG system also has an Electric Oil Pump(EOP). Be ...