|
1. |
Installation is the reverse of removal.
|
• |
Make sure vehicle does not roll before setting
room side shift lever and T/M side manual control lever
to "N" position.
|
|
• |
Install the guide member (A) of the select cable
(B).
|
|
• |
Adjust the slide clip (B) to fit it into the select
lever pin (A) and install the snap pin (C).
|
|
|
1.
Check the select cable for proper operation and for damage.
2.
Check the shift cable for proper operation and for damage.
...
Description
Back up lamp switch is pushed by the reverse lug sliding when select arm,
and switches the back up lamp.
...
Hyundai Elantra MD/UD: Installation
Inspection
Back-up Lamp Switch. Description and Operation