|
In the case of the vehicle equipped with immobilizer or button
engine start system, perform "Key Teaching" procedure together (Refer
to "Immobilizer" or "Button Engine Start System in BE group).
|
|
1. |
Installation is reverse of removal.
ECM installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
ECM bracket installation bolt/nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
|
|
In the case of the vehicle equipped with immobilizer or button
engine start system, perform "Key Teaching" procedure ...
1.
TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis
ground using the backside of ECM harness connector as ECM side check
point. If the problem is fo ...
Hyundai Elantra MD/UD: Installation
