Hyundai Elantra MD/UD: Indicator light - Electronic stability control (ESC) - Brake system - Driving your vehicle - Hyundai Elantra MD 2010-2015 Owners manualHyundai Elantra MD/UD: Indicator light

ESC indicator light

ESC indicator light

ESC OFF indicator light

ESC OFF indicator light

When ignition switch is turned to ON, the indicator light illuminates, then goes off if the ESC system is operating normally.

The ESC indicator light blinks whenever ESC is operating or illuminates when ESC fails to operate.

The ESC OFF indicator light comes on when the ESC is turned off with the button.

Driving with varying tire or wheel sizes may cause the ESC system to malfunction. CAUTION

Driving with varying tire or wheel sizes may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires.

The Electronic Stability Control system is only a driving aid; use precautionsWARNING

The Electronic Stability Control system is only a driving aid; use precautions for safe driving by slowing down on curved, snowy, or icy roads. Drive slowly and do not attempt to accelerate whenever the ESC indicator light is blinking, or when the road surface is slippery.

ESC operation off
ESC OFF state To cancel ESC operation, press the ESC OFF button (ESC OFF indicator light illuminates). If the ignition switch is turned to LOCK position when ESC is off, ESC remains off. Upon re ...

ESC OFF usage
When driving ESC should remain on for daily driving whenever possible. To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface. WARNING Never press ...