Inspection
|
1. |
Measure the primary ciol resistance between terminals 1 and 2.
Standard value :
0.58 ± 10% (Ω)
|
|
|
2. |
Measure the secondary ciol resistance between the high-voltage
terminal for the No.1 and No.4 cylinders, and between the high-voltage
terminals for the No.2 and No.3 cylinders.
Standard value :
8.8 ± 15% (KΩ)
|
|
When measuring the resistance of the secondary coil, be
sure to disconnect the ignition coil connector.
|
|
Description
Ignition timing is controlled by the electronic control ignitiontiming
system. The standard reference ignition timing datafor the engine operating
conditions are pre-programmed i ...
Inspection
1.
Disconnect the spark plug cables from the spark plugs.
When rem ...
Hyundai Elantra HD: Ignition Coil. Repair procedures
