Specifications
Item
|
Specification
|
Type
|
Electric Power Steering System
|
Steering gear
|
Type
|
Rack & Pinion
|
Rack stroke
|
154±1 mm (6.07±0.04 in)
|
Steering angle (Max.)
|
Inner
|
39.4°+0.5° / -1.5°
|
Outer
|
32.6°
|
Tightening Torques
Item
|
Tightening torque (kgf.m)
|
N.m
|
kgf.m
|
lb-ft
|
Hub nuts
|
107.9 ~ 127.5
|
11.0 ~ 13.0
|
79.6 ~ 94.0
|
Steering wheel lock nut
|
44.1 ~ 49.0
|
4.5 ~ 5.0
|
32.5 ~ 36.2
|
Steering column mounting
|
Bolt
|
53.9 ~ 58.8
|
5.5 ~ 6.0
|
39.8 ~ 43.4
|
Nuts
|
25.0 ~ 29.4
|
2.5 ~ 3.0
|
14.5 ~ 21.7
|
Steering column to Universal joint
|
49.0 ~ 58.8
|
5.0 ~ 6.0
|
39.8 ~ 43.4
|
Bolt connecting universal joint to pinion
|
32.4 ~ 38.3
|
3.3 ~ 3.8
|
23.9 ~ 27.5
|
Tie rod end castle nut
|
24.5 ~ 34.3
|
2.5 ~ 3.5
|
18.1 ~ 25.3
|
Lower arm to front axle
|
58.8 ~ 70.6
|
6.0 ~ 7.2
|
43.4 ~ 52.1
|
Steering gear box to sub frame
|
88.3 ~ 107.9
|
9.0 ~ 11.0
|
65.1 ~ 79.6
|
Stabilizer link nut
|
98.1 ~ 117.7
|
10.0 ~ 12.0
|
72.3 ~ 86.8
|
Sub frame mounting bolts & nuts
|
156.9 ~ 176.5
|
16.0 ~ 18.0
|
115.7 ~ 130.2
|
Troubleshooting
Trouble Symptom
|
Cause of the symptom
|
Remedy
|
Excessive play in steering
|
Loose U-joint bolt
|
Retighten or replace as necessary
|
Loose yoke plug
|
Retighten
|
Loose steering gear mounting bolts
|
Retighten
|
Loose or worn tie rod end
|
Retighten or replace as necessary
|
Steering wheel does not return to its original position
|
Excessive turning resistance of tie rod end
|
Replace
|
Yoke plug excessively tight
|
Adjust
|
Tie rod and/or ball joint cannot turn smoothly
|
Replace
|
Loose mounting of gear box at the subframe
|
Retighten
|
Worn steering shaft joint and/or body grommet
|
Correct or replace
|
Distorted rack
|
Replace
|
Rattling or chucking noise in the rack and pinion
|
Loose steering gear box mounting
|
Reposition
|
Loose tie rod end and/or ball joint
|
Repace
|
Worn tie rod and/or ball joint
|
Repace
|
Loose yoke plug
|
Replace
|
Repair procedures
Steering Wheel Play Inspection
| 1. |
Turn the steering wheel so that
the front wheels can face straight ahead. |
| 2. |
Measure the distance the steering
wheel can be turned without moving the front wheels.
Standard value : 30mm (1.18in.)
or less
|
|
| 3. |
If the play exceeds standard
value, inspect the steering column, shaft, and linkages. |
Checking stationary steering effort
| 1. |
Position the vehicle on a level
surface and place the steering wheel in the straight ahead position. |
| 2. |
Attach a spring scale to the
steering wheel. With the engine speed 600 ±100 rpm, pull the scale and read
it as soon as the tires begin to turn.
Standard value : 3.0kgf or
less
|
|
| 3. |
If the measured value exceeds
standard value, inspect the power steering gear box and ESP system |
Components and Components Location
Components
1. Driver airbag module(DAB)
2. Remote contorl switch
3. wiring
4. Steering wheel
5. Lower cover
...
Hyundai Elantra AD: General Information
