Hyundai Elantra MD/UD: ESC operation - Electronic stability control (ESC) - Brake system - Driving your vehicle - Hyundai Elantra MD 2010-2015 Owners manualHyundai Elantra MD/UD: ESC operation

ESC ON condition

  • When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate for approximately 3 seconds, then ESC is turned on.
  • Press the ESC OFF button for at least half a second after turning the ignition ON to turn ESC off. (ESC OFF indicator will illuminate). To turn the ESC on, press the ESC OFF button (ESC OFF indicator light will go off).
  • When starting the engine, you may hear a slight ticking sound. This is the ESC performing an automatic system self-check and does not indicate a problem.

When operating

ESC indicator light blinks.When the ESC is in operation, ESC indicator light blinks.

  • When the Electronic Stability Control is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual.
  • When moving out of the mud or driving on a slippery road, pressing the accelerator pedal may not cause the engine rpm (revolutions per minute) to increase.
Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC appl ...

ESC operation off
ESC OFF state To cancel ESC operation, press the ESC OFF button (ESC OFF indicator light illuminates). If the ignition switch is turned to LOCK position when ESC is off, ESC remains off. Upon re ...