There are three popular methods of towing a vehicle :
- |
The operator loads the vehicle on the back of truck. This is best
way of transporting the vehicle.
|
- |
The tow truck uses two pivoting arms that go under the tires of
the driving axle and lift them off the ground. The other two wheels
remain on the ground.
|
- |
The tow truck uses metal cables with hooks on the ends. These
hooks go around parts of the frame or suspension, and the cables lift
that end of the vehicle off the ground. The vehicle's suspension and
body can be seriously damaged if this method of towing is attempted.
|
If the vehicle cannot be transported by flat-bed, should be towed with
the wheels of the driving axle off the ground and do the following :
Manual Transaxle
• |
Release the parking brake.
|
• |
Shift the Transaxle to neutral
|
Automatic Transaxle
• |
Release the parking brake.
|
• |
Shift to [D] position, then [N] position.
|
•
|
The vehicle equipped with full-time 4WD should be only
transported on a flat-bed.
|
•
|
Improper towing preparation will damage the transaxle.
Follow the above procedure exactly. If you cannot shift the
transaxle or start the engine(automatic transaxle), your vehicle
must be transported on a flatbed.
|
•
|
It is the best to tow vehicle no farther than 30km (19miles),
and keep the speed below 50km/h (30mph). (For the full-time
4WD vehicle, limit the towing to 1.5km (1mile) and 15km/h (10mph).)
|
•
|
Trying to lift or tow your vehicle by the bumpers will
cause serious damage. The bumpers are not designed to support
the vehicle's weight.
|
|
If the vehicle needs to be towed, call a professional towing service.
Never tow vehicle with just a rope or chain. It is very dangerous.
...
Bolt nominal
diameter (mm)
Pich (mm)
Torque Nm (kg.cm, lb.ft)
Head Mark 4
Head Mark 7
...