Hyundai Elantra MD/UD: Body Side Moldings. Repair procedures - Exterior - Body (Interior and Exterior) - Hyundai Elantra MD 2010-2015 Service manualHyundai Elantra MD/UD: Body Side Moldings. Repair procedures

Replacement

Roof Garnish Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof garnish (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
Delta Garnish Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the delta garnish (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
Quarter Garnish Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the quarter garnish (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
Front Wheel Guard Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting clips and screws, then remove the front wheel guard (A).
3.
Installation is the reverse of removal.
•
Replace any damaged clips.
Rear Wheel Guard And Rear Guard Deflector Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged
•
Put on gloves to protect your hands.
•
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting screws and clips, then remove the rear wheel guard (A) and rear guard deflector (B).
3.
Installation is the reverse of removal.
•
Replace any damaged clips.

Adjustment
Glass Adjustment • Check the glass run channel for damage or deterioration, and replace ...

Sunroof. Components and Components Location
Components 1. Glass panel assembly 2. Sunshade assembly 3. Plate cover [RH] 4. Plate cover [LH] 5. Motor assembly 6. Sunroof frame assembly 7. Fra ...